42 mm / 1,66", without optics
80° Half Peak Angle, without optics
Fixture only: 11,7 kg / 25.8 lbs
Manual Version: 14,2 kg / 31.3 lbs
Pole Op Version: 14,9 kg / 32.9 lbs
Aluminum yoke with quick release, high strength tilt lock, pole operation option (pan and tilt)
28 mm Spigot (Junior Pin)
+/-90° in dry location, +75° / -90° in wet location with rain cover
Voltage Input Range
100 - 240 V~, 50 - 60 Hz
400 W Nominal, 500 W Maximum
Mains Power Connection
powerCON TRUE1 TOP
(Bare Ends / Schuko / Edison, Japanese, Chinese cables available)
3-Pin XLR Connector (Pin 1: negative, Pin 2: positive)
Battery DC Voltage Range
48 - 52 V⎓
calibrated 2,000 K to 20,000 K continuously variable correlated color temperature
CCT, HSI, individual color, gel selection, x/y coordinates, source matching, lighting effects, and color sensor mode
Color Temperature Tolerance
3,200 to 5,600 K: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
High Color Rendition
3.200 to 5.600 K:
CRI Average > 98
TLCI Average > 95
TM-30 Average > 94
Continuously adjustable between Full Minusgreen to Full Plusgreen
Smooth, 100 – 0%, continuously, linear / exponential / logarithmic / „S“ curve
Removable Control Panel via PoE, 5-pin XLR in and through, EtherCON in and through, 2 x USB-A, USB-C, SD Card, Camera Sync Input
Wireless control via LumenRadio CRMX* (DMX & RDM), Full E1.20 RDM standard implementation with custom & standard RDM commands
* Brand: LumenRadio AB, Equipment: CRMX TiMo, Model: 200-1502, Product: Orbiter 2.4G Wireless Control Module, Frequency Range: 2402 - 2480 MHz, Frequency of Operation: 2402 - 2480 MHz, Power Output: 17.51 dBm, Number of Channels: 79, Channel Spacing: 1 MHz, Modulation Type: GFSK
Ambient Temperature Operation
-20 to +45º C (-4 to +113º F)
IP 20 without Rain Cover, IP24 with Rain Cover L2.0037805
Estimated LED Lifetime (L70)
Estimated Color Shift Over Lifetime (CCT)
+/- 5 %
CB, CE, ENEC, cNRTLus, ICES, FCC, PSE, MIC, KC, SRRC, RCM, IFT, TRA, ETA, ANATEL, ENACOM, NTC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canada: CAN ICES-3 (B)/NMB-3(B)
All specifications are preliminary typical values. Subject to change without notice.
² Orbiter Open Face 30° depicted; values as of November 2020
ARRI, the ARRI Logo, ARRIMAX, ARRISUN, EB, LiOS, L-Series, MAX Technology, M-Series, Orbiter, POCKETPAR, Quick Lighting Mount, True Blue, SkyPanel, SKYPANEL, T 12 and T 24 are registered Trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.